Radial shaft seal Simmerring® PPS

Description

• Very good static sealing effect with low-viscosity or gaseous media.
• Low friction (up to 50% lower frictional torque than commercially available seals)
• Compensation of thermal expansion, e.g. in light metal housings, very good sealing effect with greater roughness and split housings
• Use at high speeds
• Longest service life

• Dynamic sealing of rotating shafts, independent of direction of rotation
• Optimized sealing lip design for pressure loads
• Good static seal between sealing lip and shaft at standstill
• Protective lip against dirt accumulation from outside
• Rubberized outer jacket ensures tight fit and seal to housing bore
• Self-retaining
• Reduced friction leads to a lower temperature level in the sealing gap

Most commonly used in the following applications:

• Hydrostatic drives